2450 Series Overhead Door
Brand: DBCI
A Low Overhead, Heavy Duty, Insulated Solution
Our DBCI 2450 Heavy Duty Low Headroom Series overhead door is insulated and utilizes 9 1/2″ 16 gauge drums instead of 12″ drums, which allows it to operate quietly and requires less headroom during installation.
Insulated roll-up doors feature a steel curtain with flexible insulation material, such as mylar, that allows the door to open and close with ease. The insulation material is adhered to the interior skin of the door curtain to provide continuous insulation. To evaluate insulating properties of your roll-up door, check the R-value. The R-value describes the thermal resistance of your insulation material. The higher the R-value, the greater the effectiveness of the insulation.
Choose a Door Size
Features
Curtain
- 26-gauge galvanized, Grade E hard steel
- 5/8″ ribbed corrugation
- Max opening size 12′ x 14′
- Siliconized polyester WeatherXL™ paint over prime coat
Bottom Bar
- 6063 – T6 aluminum extrusion
- 2″ x 1 1/2″ galvanized angles
- Bulb astragal
- Stainless steel nuts and bolts
Axle-Drum Assembly
- 1 5/16″ O.D. steel axle, 14-gauge
- 11-gauge axle on doors over 10′ wide
- Utilizes 9.5″, 16-gauge drums
- Shielded steel ball bearings in drums
- Oil tempered torsion springs
A.C.E. (Advanced Curtain Engagement) Guide System
- 14-gauge galvanized steel
- Adjustable bolt on head stop
- Polyethylene wear strip
- Pre-punched holes for lock and attachment fasteners
Hardware
- Saddle clamps with set fasteners
- 10-gauge slide locks, two per door
- 16-gauge step plate; two per door
- 1/4″ steel angle T-bracket
- Aluminum “T” shaped lead stop
Options
- Chain hoist 4:1 reduction
- Vision panels (17″ x 5″)
- Hood
- Steel mounting plates
- Motor operated
- Available in 24 colors, subject to availability and varying lead times
- Available with insulation as the 2450 Series Door
Installation Instructions
MCOMP-514 DBCI Installation Instructions Update Commercial Door Series_2020_FINAL
Technical Information
DASMA Rolling Door Technical Data Sheet #276
Operator Motors
Autotech Easy Roller
- For OH Doors up to 12′-0″ Tall
EasyRoller operator features a slim profile, reliability, security and convenience. The operator comes with Soft start/stop operation, advanced door profiling and obstruction sensing for secure and safe operation.
Some Features Include:
- 600N DC Motor
- Soft Start / Soft Close
- Slim Fit Design
- Intelligent Safety Seam
- Wired Safety Beams
- (2) Transmitters
- (1) Wall Button
- LED Courtesy Lighting
Data Sheet:
Dominator Easyroller Data Sheet
Micanan- LHA
- For OH Doors 14′ Tall and Taller
The Micanan Pro-LHA was designed for commercial rolling doors that require no more than 15 cycles per hour. It features a limited duty belt drive jackshaft with an emergency chain hoist. This hoist operator comes standard with a 2-year warranty.
Some Features Include:
- Heavy-Duty 4L V-Belt
- Three button open-close-stop control station Nema-1
- 2 Year Factory Warranty
- Emergency Chain Hoist
- Left or Right Hand Mounting
Data Sheet:
Related Overhead Doors