3250 Series Overhead Door

Brand: DBCI

A Commercial, Heavy Duty, and Insulated Solution

Our DBCI 3250 Series commercial-grade steel door is built with superior, high-strength materials and is engineered to withstand moderate to high wind loads common in many coastal regions.

The 3250 Series features ribbed corrugation with an “L” shaped windlock design that grips in place under high pressure, and an 80-degree profile that makes installation fast and easy.

Insulated roll-up doors feature a steel curtain with flexible insulation material, such as mylar, that allows the door to open and close with ease. The insulation material is adhered to the interior skin of the door curtain to provide continuous insulation. To evaluate insulating properties of your roll-up door, check the R-value. The R-value describes the thermal resistance of your insulation material. The higher the R-value, the greater the effectiveness of the insulation.

Choose a Door Size

Wood (+$0.00)
Masonry (+$0.00)
Steel (+$39.85)
Polar White
High Gloss White
Gallery Blue (+$140.00)
Rustic Red
Ivy Green (+$140.00)
Fern Green
Hawaiian Blue
Light Stone
Burnished Slate
Saddle Tan
Silhouette Gray
Evergreen (+$140.00)
Koko Brown
Crimson Red
Sunset Orange (+$140.00)
Marine Green (+$140.00)
Safety Yellow (+$140.00)
Teal (+$140.00)
Tangerine (+$140.00)
Dark Teal (+$140.00)
Maroon (+$140.00)
Patriot Red (+$140.00)
Colony Green (+$140.00)
Galvalume Plus
Wasabi Green (+$140.00)
None (+$0.00)
Chain Hoist: 8:1 Reduced Drive (+$145.00)
No Motor
Electric Motor - Micanan-LHA (+$820.35)
Product total
Options total
Grand total

Features

Curtain

  • 26-gauge galvanized, Grade E hard steel
  • 5/8″ ribbed corrugation
  • Max opening size 20′ x 16′
  • Siliconized polyester WeatherXL paint over prime coat

Bottom Bar

  • 6063 – T6 aluminum extrusion
  • 2″ x 1 1/2″ galvanized angles
  • Bulb astragal
  • Stainless steel nuts and bolts

Axle-Drum Assembly

  • 1 5/16″ O.D. steel axle, 14-gauge
  • 11-gauge axle on doors over 10′ wide
  • Utilizes 12″, 16-gauge drums
  • Shielded steel ball bearings in drums
  • Oil tempered torsion springs

A.C.E. (Advanced Curtain Engagement) Guide System

  • 14-gauge galvanized steel
  • 14-gauge wind lock bar
  • Adjustable bolt on head stop
  • Polyethylene wear strip
  • Pre-punched holes for lock and attachment fasteners

Hardware

  • Saddle clamps with set fasteners
  • 10-gauge slide locks, two per door
  • 16-gauge step plate; two per door
  • 1/4″ steel angle T-bracket

Options

  • Chain hoist 8:1 reduction
  • Header seal
  • Hood
  • Steel mounting plates
  • Motor operated
  • Available in 24 colors, subject to availability and varying lead times
  • Available without insulation as the 3000 Series Door

Installation Instructions

 DBCI Installation Instructions Update Commercial 3000 5000 Series_May2019

Technical Information

 DASMA Rolling Door Technical Data Sheet #276

 3000 Series CAD

 2010ADAStandards_prt

 DBCI PRODUCT WARRANTY (1)

 Signature 200 Panel Warranty_DBCI2

 DBCI 3000 Series Data Sheet

Operator Motor

 Micanan- LHA 

  • For OH Doors 14′ Tall and Taller

The Micanan Pro-LHA was designed for commercial rolling doors that require no more than 15 cycles per hour. It features a limited duty belt drive jackshaft with an emergency chain hoist. This hoist operator comes standard with a 2-year warranty.

Some Features Include:

  • Heavy-Duty 4L V-Belt
  • Three button open-close-stop control station Nema-1
  • 2 Year Factory Warranty
  • Emergency Chain Hoist
  • Left or Right Hand Mounting

Data Sheet:

Nice_Spec-Sheet_PRO-LHA Data Sheet

Related Overhead Doors