5250 Series Overhead Door

Brand: DBCI

A Commercial Heavy Duty Wind Rated Solution

Our DBCI 5250 is a heavy-duty, wind rated, sheet doors are built to stand up to strong winds caused by tornadoes and hurricanes for years with little-to-no maintenance, the durable 5250 Series door meets the stringent building codes of many coastal areas.

Features include deep engagement guides and side curtain “J” shaped windlocks to maintain the operational integrity of the door and comply with most state and local building codes.

Insulated roll-up doors feature a steel curtain with flexible insulation material, such as mylar, that allows the door to open and close with ease. The insulation material is adhered to the interior skin of the door curtain to provide continuous insulation. To evaluate insulating properties of your roll-up door, check the R-value. The R-value describes the thermal resistance of your insulation material. The higher the R-value, the greater the effectiveness of the insulation.

Choose a Door Size

Clear
Wood (+$0.00)
Masonry (+$0.00)
Steel (+$39.85)
Polar White
High Gloss White
Gallery Blue (+$140.00)
Rustic Red
Ivy Green (+$140.00)
Fern Green
Hawaiian Blue
Light Stone
Burnished Slate (+$0.00)
Saddle Tan
Silhouette Gray
Evergreen (+$140.00)
Koko Brown
Crimson Red
Sunset Orange (+$140.00)
Marine Green (+$140.00)
Safety Yellow (+$140.00)
Teal (+$140.00)
Tangerine (+$140.00)
Dark Teal (+$140.00)
Maroon (+$140.00)
Patriot Red (+$140.00)
Colony Green (+$140.00)
Galvalume Plus
Wasabi Green (+$140.00)
None (+$0.00)
Chain Hoist: 8:1 Reduced Drive (+$145.00)
No Motor
Electric Motor - Micanan-LHA (+$820.35)
Product total
Options total
Grand total

Features

Curtain

  • 26-gauge galvanized, Grade E hard steel
  • 5/8″ ribbed corrugation with three-rivet windlock attachment
  • Max opening size 18′ x 16′
  • Siliconized polyester WeatherXL paint over prime coat

Bottom Bar

  • 6063 – T6 aluminum extrusion
  • 2″ x 1 1/2″ galvanized angles
  • Bulb astragal
  • Stainless steel nuts and bolts

Axle-Drum Assembly

  • 1 5/16″ O.D. steel axle, 14-gauge
  • 11-gauge axle on doors over 10′ wide
  • Utilizes 12″, 16-gauge drums
  • Shielded steel ball bearings in drums
  • Oil tempered torsion springs

A.C.E. (Advanced Curtain Engagement) Guide System

  • 12-gauge galvanized steel
  • 12-gauge wind lock bar
  • Adjustable bolt on head stop
  • Polyethylene wear strip
  • Pre-punched holes for lock and attachment fasteners

Hardware

  • Saddle clamps with set fasteners
  • 10-gauge slide locks, two per door
  • 16-gauge step plate; two per door
  • 1/4″ steel angle T-bracket

Options

  • Chain hoist 8:1 reduction
  • Header seal
  • Hood
  • Steel mounting plates
  • Motor operated
  • Available in 24 colors, subject to availability and varying lead times
  • Available without insulation as the 5000 Series Door

Installation Instructions

 DBCI Installation Instructions Update Commercial 3000 5000 Series_May201 9

Technical Information

 DASMA Rolling Door Technical Data Sheet #276

 5000 Series CAD

 2010ADAStandards_prt

 DBCI PRODUCT WARRANTY (1)

 Signature 200 Panel Warranty_DBCI2

 DBCI 5000 Series Data Sheet

 DBCI Color Chart_updated 7_27_20

Operator Motor

 Micanan- LHA 

  • For OH Doors 14′ Tall and Taller

The Micanan Pro-LHA was designed for commercial rolling doors that require no more than 15 cycles per hour. It features a limited duty belt drive jackshaft with an emergency chain hoist. This hoist operator comes standard with a 2-year warranty.

Some Features Include:

  • Heavy-Duty 4L V-Belt
  • Three button open-close-stop control station Nema-1
  • 2 Year Factory Warranty
  • Emergency Chain Hoist
  • Left or Right Hand Mounting

Data Sheet:

Nice_Spec-Sheet_PRO-LHA Data Sheet

Related Overhead Doors